Android 4.3 JELLY BEAN for Samsung Galaxy Tab P1000

ANDROID 4.3 JELLY BEAN FOR SAMSUNG GALAXY TAB P1000

UPDATE: Now you can even install android 4.4 kikat on you device. Full instructions HERE

Google recently released its newest flavor of android. The next installment in jelly bean series, android 4.3 version of google's OS. Android 4.3 is more refined and smoother than the later ones. It now has bluetooth smart support for low energy consumption while using bluetooth devices.It also supports the latest Open GL 3.0 high performance graphics. It also features restricted profiles. Those who have used jelly bean before already know about the magic of Project Butter which increases the FPS to 60 and increases smoothness and stability of android. Its basically the best android has to offer YET!!.

                                                    Unfortunately for all the Original Galaxy Tab users the updates stopped rolling out at very early stage i.e at gingerbread ( 2.3). Samsung stopped providing further update despite the fact that the 1Ghz processor and that 512 MB of ram can still run the latest OSs smooth enough. Thanx to the openness of android third party custom ROMs are available thanx to some big hearted devs who care about the feelings of a user. Galaxy tab has been refreshed thanx to CM teams and SGT7 team. They have brought google's latest for us. In this article I will tell you How To Install Android 4.3 on galaxy tab P1000. This method is only for galaxy tab p1000 original version and will not work with other variants.

                                                  **IMPORTANT NOTICE**
                       I will not be held responsible for any kind of damage made to your tablet i.e 

                      if it gets bricked, catches fire, melts or anything else. The method is already 

                      tested and works just right if followed properly.

REQUIREMENTS:

• Rooted galaxy tab p1000 with a custom recovery like CWM installed. If your tab is not rooted you can follow the link here to for the rooting instructions.
• CM10.2 custom rom which can be downloaded form this link.
• Google apps package for android 4.3 from here.
• USB cable and a computer with necessary drivers installed.

PLEASE CHECH THAT YOUR TAB IS 60% CHARGED BEFORE FOLLOWING THE PROCESS OTHERWISE THE TAB ME SHUTDOWN BETWEEN PROCESS WHICH CAN CAUSE SERIOUS HARM OR BRICK YOUR DEVICE.

INSTRUCTION:

• Download the cm10.2 custom rom .zip file from the link provided above and transfer it to your tablet via usb cable. Transfer it to the root of your sd card or to a place where you can easily locate it.
• Download the Gapps package from the link provided and transfer it as well.Transfer it to the root of your sd card or to a place where you can easily locate it.
• Now disconnect your tab and reboot your tablet into recovery mode by holding the power button + volume up button.
• Now use your volume buttons for navigation and power button for selection and wipe data/ factory reset your tab and clear the cache partition.THIS STEP IS VERY IMPORTANT.
• Now go to install zip from sd card and select the CM10.2 zip file select it and wait for a few minutes until it is flashed. Now repeat the same to flash Gapps.
• Now again do a wipe data/factory reset. Then REBOOT AND ITS DONE. NOTICE that the first reboot takes about 15-20 minutes so wait.

IF you follow these instructiosn carefully you will have a galaxy tab p1000 running android 4.3

                 THE ROM WILL HAVE SOME BUGS AS ITS STILL UNDER DEVELOPEMENT BUT I HVE USED IT AND THOSE MINOR BUGS WILL ALSO BE GONE SOON!!:) ENJOY!!

GALAXY TAB 3

Galaxy tab 3

Samsung has launched ita galaxy tab 3. It is faster than the older tab 2 as it has a faster 1.2Ghz dual-core processor and boasts 1GB of RAM.

It will be available for sale very soon.

It also has a 3MP camera, 7-inch TFT LCD screen, latest jelly bean OS. Another major difference is in the dimensions of the thing. It is now smaller, thinner, lighter and easier to carry than the tab 2.

Hoping to use it soon.!!

Anybody else interested in getting their hands on the latest galaxy tab 3.

how to root galaxy s3(I9300) step-by-step guide

Introduction

Samsung has adopted a yearly cycle of releasing new flagships in its Galaxy lineup of Android smartphones, and this year was no exception, bringing to Android fans all across the globe the new and fabled Galaxy S4. While the latest king has already taken the throne and caused its predecessor, the Galaxy S III GT-I9300, to step aside in the smartphone arena, there’s no denying the fact that the device still remains a very capable and powerful one, fulfilling the needs of millions of users out there. Another testament to the fact is that Samsung is continuing to bring newer firmware for Galaxy S III International, with the latest one being released just this month, coming with PDA build I9300XXEMC2 and Android version 4.1.2. While the Galaxy S III still has to see an official Android 4.2 Jelly Bean update from Samsung, there are custom ROMs,open source, community driven projects available that can let you taste the latest Android on GT-I9300. If you don’t opt that way, you may want to root your device on the latest firmware, for which we offer you this guide.

Before we get to the actual rooting process, allow me to clarify that as of this writing, I9300XXEMC2 is the latest officially available firmware for the international version of Samsung Galaxy S III GT-I9300, distributed by Samsung through Kies. It comes with Android 4.1.2 Jelly Bean, and offers improvements over previous versions like faster app launcher redraws, faster launching of applications, improved performance of the Phone and Contacts apps, better RAM utilization, and other general enhancements. The battery life also seems to have improved, but will vary from one usage scenario to the other.

                                                              

                                                                    The root method that we will opt for here will make use of Chainfire’s CF-Root, which is according to me the easiest rooting technique for a vast variety of devices by now. Do understand, however, that while this method is tried and tested, I or the developer cannot take any responsibility for any damage to your device as a result of following these instructions. Proceed at your own risk.

Requirements

• Samsung galaxy sIII(GT-I9300) with more than 50% battery life remaining, 100% just to be on the safer side of the fence.
• CF-root package for galaxy sIII
• Odin3 v3.07
• Latest samsung USB drivers ( should be present if you have latest kies installed)
• Galaxy S3 USB cable for connection

Procedure

 STEP 1:Download both Odin3 and CF-Auto Root packages from the link above. Extract the contents of the root package to a location of your choice.

STEP 2:Launch Odin3, click the PDA button and select the .tar.md5 file     that you extracted from the CF Root package.

STEP 3:Make sure that Re-partition is unchecked in Odin3, and that nothing is selected in PIT.

STEP 4:Turn off your Galaxy S III and put it in download mode by pressing and holding volume down+power+home at the same time, and then pressing volume up for confirmation.

STEP 5:With your device in Download Mode, connect it to the PC using the USB cable. If all went correct, Odin3 will detect the device, indicated by a COM address in the top left corner of Odin3.

STEP 6:Double check that the correct PDA file is selected and that re-partition isn’t checked, and hit the Start button to begin flashing the rooted kernel.

STEP 7:Once the flash is complete, the phone will reboot and enter recovery mode, automatically initiating the rooting procedure. It will reboot once more.

               ENJOY!!! =)

how to root galaxy s4 step by step guide

Introduction
There's already a way to root the Samsung galaxy s4. Thanks to a member from the XDA forum and despite the obstacles set by Samsung, the S4 can be rooted easily with a few clicks. By completing this, you'll be able to get rid of the TouchWiz applications,overclock your phone( srsly??0_o),download applications that require root permissions and much more.... This is how it's done:

Warning

The root entails many risks and if you don't perform the procedure correctly, you could find yourself with an unusable phone. That being said, this method won't have the consequence of loss of data, but caution is advised! Save all of your files beforehand. Neither ANDROID WORLD nor I will be held responsible for any damages incurred on your phone.

It should also be signaled that Samsung's warranty might be nul and void after doing this. If something were to go wrong during the procedure (you unplug the chord accidentally, for example), there aren't any custom ROMs at the moment, though they should start appearing in the next few days. In conclusion, be very careful and follow all of the instructions.

PROCEDURE

1: Downloading the necessary package. (This contains the .tar file and also Odin V3) link link2

1. 
   
2. 2:Install Samsung S4 drivers. Quickest method is to download the latest Samsung Kies which includes the drivers required. Download Samsung Kies
3. 
   
4. 2:Once the drivers are installed. Reboot your device to Download mode. (Turn off the phone. Press Volume Down + Home button + Power off keys together and release Power key when screen shows . Release all when screen shows Download mode.)
5. 
   
6. 3:Connect the phone to your PC and wait for phone to be detected.
7. Extract the contents of the zip file downloaded in step 1 to a folder and open it.
8. Open Odin v3 (Odin v1.85 will do too) Click on the PDA button and select cofface_I9500_cwm_recovery_en_new.tar inside the same folder.
9. Leave Auto Reboot and F.Reset Time selected and everything else unselected. Press START. The process should PASS and the phone should auto reboot.
10. Turn off phone and enter Recovery. (Press Volume Up + Home + Power off together.)
11. Select ROOT YOUR PHONE option in recovery.
12. Reboot to system.

You now have a rooted Galaxy S4 I9500.

ENJOY!!

Read more: http://wccftech.com/root-samsung-galaxy-s4-i9500-exynos-model/#ixzz2SJby9Slt

FEEDBACK

If anyone has any suggestions rrgarding m blog and my posts feel free to comment...=)..
Will like to listen from you.
Also if anyone wants a tutorial regarding any device feel free to ask.

How to root galaxy tab p1000 gingerbread ( android 2.3 )

Galaxy tab was the first ever tablet to be released by the south korean IT giant Samsung. It has a 1 gigahertz cortex A8 processor and 512 MB of RAM. The specification are not that high end now. So you may like to root your galaxy tab. Rooting will remove all the restrictions set by the manufacturer and will unchain your device. You will be able to overclock your device, install a custom boot image and even install a custom ROM.
                      There are many ways to root your galaxy tab but i will try and explain the easiest one. Please note that I will not be responsible for any damage you cause to your device and rooting will end the warranty of your device.

REQUIREMENTS:
1: You must have the USB chord to connect you tablet to pc.
2: Download and install samsung kies mini on your computer.
3: Enable USB debugging on your device "settings --> applications -->developement --> USB debugging "
4: Remeber rooting will void your warranty
5: Download the USB drivers for your device ( click here ) and install  them on your pc.

After completing he above steps you can now follow the instruction to root your tablet.

1: Download the DooMLoRD's easy rooting tool kit from here and unzip it on your pc.

2: Disable, uninstall firewall and samsung kies from both pc and tablet.

3: Connect your galaxy tab to pc via USB cable.

4: Now run the runme.bat present in the DooMLoRD's toolkit folder. Now wait for the process to complete.

Now you are hopefully having a rooted galaxy tab p1000.
Now you can do whatever you can or like to do with your device.
Even install a custom rom on it. On more details on how to install a custom rom ( android 4.2.2 ) on galaxy tab p1000. Go here

Android 4.2 for galaxy tab p1000

The original galaxy tab p1000 was a device launched quite a time back from now. Despite it being capable to run latest verision of android samsung denied any further upgrades from android gingerbread. Due to it having a good 1ghz processor and a hefty 512mb of RAM. Many custom roms are available for it now.
Thanks to humberos team it gets the taste of latest android availale i.e android 4.2.2. In this post i will give you step by step guide on how to install humberos custom android 4.2.2 rom on your galaxy tab p1000.

Please note: I will be in noway held responsible for any damage caused to your device during the process. Please follow every piece of instruction carefully.

REQUIREMENTS :
1: A rooted galaxy tab with a custom recovery installed.( Learn how to root from here )
2: humber os custom rom file. Download link below
     link
3: Google apps for anroid 4.2.2. Download link below
     click here
4: please see that your tablet is charged to minimum 70%

INSTRUCTIONS:
1: Download bothe files i.e the ROM and the Gapps package rom the links posted above.

2: Connect your tablet to your pc via usb cable in mass storage mode
And transfer the downloaded files to your sd card and dont transfer them too deep into a folder just keep them in a place where they are very easy to locate.

3: Now boot into recovery by turning off your tablet and turning it on
By holding the power and the volume up button till you see the galaxy tab logo.

4: Now once in recovery navigate to "wipe data and factory reset" using volume buttons and select it using the power button. Run it.
Now select "wipe cache partition" and run  it.

5: Now select 'install zip from sd card" and find the humber os file you transferred. Select and run it.

6: Once the installation is complete select 'install zip from sd card ' and now select the Gapps.zip file you downloaded.

7: Once the installation complete. Reboot your tablet. It will take long for the tablet to bpot for the first time.

ENJOY NOW YOUR TABLET HAS ANDROID 4.2.2 ON IT.

ALL ABOUT ANDROID!

Its all about android

This blog as the name suggests is completely dediated to android.

All the latest news and stuff about the androworld. Everything thats

Happening from a new phone to a new breakthrough. A to Z

Technical help

You can even contact me if you need any kind of help and suggestions.

I will help you as soon as I can.

Custom firmwares

I will post custom roms for different devices one by one and on request too.

And much more......

MY FIRST BLOG!

Hello everyone this is my first blog and so i want you

All to co operate with me a bit.I promise that will keep

the posts coming.